10:1 Wide Input 6W 1.5KV Isolation SIP-8 DC-DC Converter

Product Description

6W 1.5KV Isolation 10:1 Wide Input Voltage SIP8 DC-DC Power Conversion


Features


  • 10:1Wide Input Voltages Range.

  • High Efficiency up to 88%.

  • Regulated Output Types.

  • Low Ripple and Noise.

  • Internal SMD Construction.

  • 1.5KVDC Isolation.

  • Operating Temperature:-40°C to +85°C.

  • Industry Standard Pinout.

  • Continuous Short Circiut Protection with Current Foldback.




Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified


Part Number Input
Voltage
Range
Output
Voltage
Range
Output
Current
Efficiency Capacitive
Load(μF)
Vdc Vdc mA %Typ Max.
27DX-24S03R6W 6-60 3.3 1600 85 1000
27DX-24S05R6W 6-60 5 1200 88 1000
27DX-24S09R6W 6-60 9 667 85 820
27DX-24S12R6W 6-60 12 500 87 680
27DX-24S15R6W 6-60 15 400 87 680
27DX-24S24R6W 6-60 24 250 87 330

Note:
1. 50% load when Vin is less than 9Vdc.
2. Ripple and ripple noise is measured by using test board with ceramic capacitor 1 μF at 50mm from output pins.



Input Specifications


Parameters Conditions Min Typ Max Units
Voltage Tolerance Vo, Io Nom     10:1  
Surge Voltage(100ms max)       76 Vdc
Input Current LOAD:0%     5 mA
Start-up Time       6 Vdc
Start-up Time Nominal input voltage
&
Nominal load
  20   ms
CTRL Module on 0 ~ 0.8Vdc or open circuit
Module off 2.5 ~ 12Vdc
Filter Capacitor        


Output Specifications


Parameters Conditions Min Typ Max Units
Voltage Tolerance 100% full load     ± 3 %
Line Regulation Regulated     ± 0.5 %
Load Regulation Regulated     ± 0.8 %
Ripple & Noise BW=DC To 20MHz     300 mVp-p
Temperature Coefficient 100% Load   ± 0.02 ± 0.03 %/℃
Over-current Protection 9~60Vdc 110   250 %Io
Over-voltage Protection 9~60Vdc 110   160 %Vo
Short Circuit Protection 9~60Vdc Continuous, Recovers automatically
after fault condition is removed


General Specifications


Parameters Conditions Min Typ Max Units
Isolation Resistance 500Vdc 1000    
Isolation Voltage Input / Output 1500Vdc/ 0.5mA/60Sec
Switching Frequency Full load,
nominal input
  220   KHz
Operating Temperature   -40   +85
Humidity Non Condensing     95 %
Cooling Free air Convection
Case Material DAP        
MTBF MIL-HDBK-217F @25℃ 1500000     Hours
Weight   4.5 g
Dimensions   21.8 x 9.2 x 11.1 mm


Dimension






 Files Download       27DX-6W-Single-Series.pdf



Certification




FEEDBACK

27DW-9W Series 9W 1.6KV Isolation 4:1 Wide Input DC-DC Converter

27D-6W Series 6W 1.5KV Isolation 2:1 DC-DC Converter

27DW-3W Series 3W 1.5KV&3KV Isolation 4:1 Single Output DC-DC Converter

27DW-3W Series 3W 1.5KV&3KV Isolation 4:1 Dual Output DC-DC Converter

27DW-Single Series 2W 1KV&3KV Isolation 4:1 Input Voltage DC-DC Converter

27DW-Dual Series 2W 1KV&3KV Isolation 4:1 Input Voltage DC-DC Converter

27D-3W Series 3W 1.5KV&3KV Isolation 2:1 Single Output DC-DC Converter

27D-3W Series 3W 1.5KV&3KV Isolation 2:1 Dual Output DC-DC Converter

27D-Single Series 2W 1KV&3KV Isolation 2:1 Input Voltage DC-DC Converter

27D-Dual Series 2W 1KV&3KV Isolation 2:1 Input Voltage DC-DC Converter

8:1 Wide Input 20W 2.25KV Isolation DC-DC Converter YNC20 Series

8:1 Wide Input 30W 2.25KV Isolation DC-DC Converter YNC30 Series

40W 8:1 Wide Input 2.25KV Isolation DC-DC Converter YNC40 Series