8:1 Wide Input 20W 2.25KV Isolation DC-DC Converter YNC20 Series

Product Description

20W 2'' x 1'' Size 2.25KV Isolation 8:1 Wide Input DC to DC Power Conversion


Features


  • 20W DIL Package.

  • 8:1 Wide Input Voltage Range.

  • High Efficiency Up to 92%.

  • Regulated Output Types.

  • No Minimum Load Required.

  • Over Power and Short Circuit Protection.

  • Over Temperature Protection.

  • Operating Temperature: -40°C to +83°C (Without Derating).

  • UL94V-0 Package Material.

  • UL/cUL/IEC/EN 62368-1 approved, CB-Report, CE Marking.

  • EMC standard of EMI EN55032:2015 approved.

  • EMC standard of EMS EN55035:2017 approved.

  • EMC standard of Canadian ICES-003 issue7(2020) approved.

  • EMC standard of 47CFR FCC Part 15 subpart B approved.





Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified


Part Number Input Voltage
Range
Input Current Output Voltage Output Current Efficiency
(@36Vin)
Maximum
Capacitor Load
No-Load Full Load
Vdc (mA TYP) (mA TYP) Vdc mA(TYP) %(TYP) μF
YNC20-36S05 9-75 8 617 5 4000 90 6800
YNC20-36S12 9-75 8 611 12 1667 91 1200
YNC20-36S15 9-75 8 611 15 1334 91 750
YNC20-36S24 9-75 8 604 24 833 92 300
YNC20-36S48 9-75 8 611 48 417 91 100
YNC20-36D12 9-75 8 610 ±12 ±833 91 ±600
YNC20-36D15 9-75 8 611 ±15 ±667 91 ±390


Input Specifications


Parameters Conditions Min Typ Max Units
Input Voltage   9 36 75 Vdc
Input Surge Voltage
(100 ms max.)
  -0.7   100 Vdc
Start-up Voltage       9 Vdc
Under Voltage Shutdown     7.5   Vdc
Start-up Time Constant Resistive Load, Nominal Vin Power-up   30   ms
Remote ON/OFF   30  
Input Filter All Models Internal Pi type
Remote ON/OFF
(Ctrl PIN Refer To –Vin PIN)
Positive Logic DC/DC ON Open or 3.5 Vdc – 12 Vdc
DC/DC OFF Short or 0 Vdc – 1.2 Vdc
Input Current of Ctrl PIN -0.5   +0.5 mA
Remote Off Input Current   3  


Output Specifications


Parameters Conditions Min Typ Max Units
Voltage Tolerance 100% Load -2   +2 %
Line Regulation Vin(min) to Vin(max) @100% Load -0.2   +0.2 %
Load Regulation 0% Load to 100% Load -0.5   +0.5 %
Ripple & Noise
(BW=20MHz)
5Vout     100 mVp-p
12Vout     120
15Vout     150
24Vout     150
48Vout     200
Transient Response Setting Time 25% Load Step Change   350 500 us
Transient Response Deviation 25% load step change -5 ±3 +5 %
Temperature Coefficient   -0.02   +0.02 %/℃
Voltage Adjustability % of Vout -10   +10 %
Output Power Protection % of Io, Hiccup mode,
Auto-recovery
115 150 190 %
Short Circuit Protection Continuous [Hiccup Mode], Auto-Recovery
Over Voltage Protection 5Vout   6.2   Vdc
12Vout, ±12Vout   15  
15Vout, ±15Vout   18  
24Vout   30  
48Vout   60  


General Specifications


Parameters Conditions Min Typ Max Units
Isolation Voltage Input to Output (60sec) 2250     Vdc
Input (Output) to Case (60sec) 1000     Vdc
Isolation Resistance 500Vdc 1000    
Isolation Capacitance 100kHz, 1V     2200 pF
Switching Frequency Full Load, Nominal Input 200 235 270 KHz
Operating Temperature
(Power Derating See Derating Graph)
Nominal Vin,
100% Load
YNC20-36S05,
YNC20-36S15,
YNC20-36D12
-40   77.2
YNC20-36S12,

YNC20-36D15,

YNC20-36S48

  80.2
YNC20-36S24   83.3
Thermal Impedance 20LFM   12.5   ℃/W
100LFM   9.5  
200LFM   7.8  
400LFM   5.1  
Maximum Case Temperature       105
Over Temperature Protection Case temperature   120  
Storage Temperature   -55   125
Humidity Non Condensing 5   95 %
Cooling Natural Convection
Case Material Copper
Potting Material Silicone (UL94-V0)
MTBF MIL-HDBK-217F@25℃ (calculated)   976,017   Hours
Weight     35   g
Dimensions   50.8 x 25.4 x 11.6 mm



 Files Download           YNC20-Series.pdf



Certification



FEEDBACK

8:1 Wide Input 30W 2.25KV Isolation DC-DC Converter YNC30 Series

40W 8:1 Wide Input 2.25KV Isolation DC-DC Converter YNC40 Series