02D-6A Series Non Isolation Regulated 4.5~19.8W POL DC-DC Converter
Product Description
Non-Isolated 4.5~19.8W POL DC to DC Converter
Features :
SIP Packages
High Efficiency 91% @5.0Vin 3.3V ,Full Load
93% @12.0Vin 3.3V ,Full Load
Customized Solutions Available
Operating Temperature From -40℃ to +85℃
3 Years Warranty
Input Under-Voltage Lockout
Input Range 2.4VDC To 5.5VDC, 8.3VDC to 14VDC
Output Current Up to 6A
Output Voltage Programmable from 0.75VDC to 3.3VDC,0.75VDC To 5VDC Via External Resistor
Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified
| Part Number | ON / OFF Logic | Input Range | Output Voltage | Output Current | Efficiency (%) 3.3Vdc @6A | |
|---|---|---|---|---|---|---|
| Min. Load | Max. Load | |||||
| 02D-05-06S | Positive (option) Negative (standard) | 2.4 ~ 5.5 Vdc Vin (min) = Vo (Set) +0.5 | 0.75 ~ 3.3Vdc | 0A | 6A | 91% @5.0Vin |
| 02D-12-06S | Vo (set) < 3.63V Vin=8.3~14Vdc Vo (set) > 3.63V Vin=8.3~13.2Vdc | 0.75 ~ 5.0Vdc | 93% @12Vin | |||
Input Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Voltage Tolerance | 05 Series Vo (set) | 2.4 | 5 | 5.5 | Vdc |
| 12 Series Vo (set) | 8.3 | 12 | 14 | ||
| Input Current | Vin = Vin (min); Io = Io (max) | 6 | A | ||
| Input Filter (Note4) | C filter | ||||
| No Load Current | Vo (set) = 0.75 Vdc | 20 @Vin = 5 | mA | ||
| Vo (set) = 0.75 Vdc | 19 @Vin = 12 | ||||
| Vo (set) = 3.3 Vdc | 45 @Vin = 5 | ||||
| Vo (set) = 5.0 Vdc | 100 @Vin = 12 | ||||
| Under Voltage Lockout | Start-up Voltage | 2.2@Vin = 5 | V | ||
| 4.5@Vin = 12 | |||||
| Shutdown Voltage | 2.0 @Vin = 5 | ||||
| 3.8 @Vin = 12 |
Input reflected ripple current 5 ~ 20MHz, 1uH source impedance: 35mAp-p
Output Specifications
| Parameters | Conditions | Min | Typ | Max | Units | |
|---|---|---|---|---|---|---|
| Output current | 6 | A | ||||
| Voltage Tolerance | Full load and Vin (min) | ±2 | % | |||
| Minimum load | 0 | A | ||||
| Line Regulation | Vin = Vin (min) to Vin (max) at Full Load | ± 0.3 | % | |||
| Load Regulation | No Load to Full Load | ± 0.5 | % | |||
| Ripple & Noise (Note2) | 20MHz bandwidth | 60 | mVp-p | |||
| Dynamic load response (Note 2) | ΔIo / Δt = 2.5A/uS, Vin (nom) | Peak deviation | 200 | mV | ||
| Load change step (25% to 100% or 100% to 25% of Io (max)) | Setting time (Vo < 10% peak deviation) | 25 | uS | |||
Dynamic load Response (Note 3) | ΔIo / Δt = 2.5A/uS, Vin (nom) | Peak deviation | 50 | mV | ||
| Load change step (25% to 100% or 100% to 25% of Io (max)) | Setting time (Vo < 10% peak deviation) | 50 | uS | |||
| Output Current Limit | 220 | % | ||||
| Output short-circuit current | Hiccup, automatic recovery | |||||
| External Load Capacitance | ESR ≧ 1mΩ | 1000 | uF | |||
| ESR ≧ 10mΩ | 3000 | uF | ||||
| Output Voltage Overshoot-Startup | Vin = Vin (min) to Vin (max); F.L | 1 | % | |||
| Voltage Adjustability (see fig.1) | 05 Series | 0.7525 | 3.3 @Vin = 5 | V | ||
| 12 Series | 0.7525 | 5.0 @Vin = 12 | V | |||
General Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Switching Frequency | 300 | KHz | |||
| Isolation voltage | None | ||||
| Efficiency | See table | ||||
| Dimensions | As figure of marking and dimension | mm | |||
| Weight | 2.8 | g | |||
| MTBF (Note 1) | MIL-HDBK-217F | 3.247 x 106 | hrs | ||
Environmental Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Operating temperature range | with derating | -40 | +85 | ℃ | |
| Storage temperature range | With derating | -55 | +125 | ℃ | |
| Thermal shock | MIL-STD-810F | ||||
| Over temperature protection | +135 | ℃ | |||
Feature Specifications
| Parameters | Conditions | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Remote ON/OFF | |||||
| Positive logic (option) | ON = (Vin-4) < Vr < Vin (Max) | 10 | uA | ||
| OFF = 0V < Vr < 0.3V | 1 | mA | |||
| Negative logic (standard) | ON = 0V < Vr < 0.3V@IIN | 10 | uA | ||
| OFF = 1.5V < Vr < Vin (Max) @IIN | 1 | mA | |||
| Input current of Remote control pin | 0.01 | 1.0 | mA | ||
| Remote off state input current Nominal Vin | 5 | mA | |||
| Rise time (Time for Vo to rise from 10% to 90% of Vo (set)) | 6 | ms | |||
| Turn-on delay time | Case 1 (Note 5) | 3 | ms | ||
| Case 2 (Note 6) | 3 | ms |
Dimension
Files Download 02D-6A-Series.pdf