Low Voltage Input 4.5V-18V 10W 1.6KV Isolation DC-DC Converter

Product Description

10W 1'' x 1'' 1.6KV isolation 4:1 Wide Input Range DC-DC Power Conversion


Features


  • 10W DIL Package.

  • 4:1 Wide Input Voltage Range.

  • High Efficiency Up to 91%.

  • Regulated Output Types.

  • No Minimum Load Required.

  • Over Power and Short Circuit Protection.

  • Operating Temperature: -40°C to +89°C(Without Derating).

  • UL94V-0 Package Material.

  • UL/cUL/IEC/EN 62368-1 approved, CB-Report, CE Marking.

  • EMC standard of EMI EN55032:2015 approved.

  • EMC standard of EMS EN55035:2017 approved.

  • EMC standard of Canadian ICES-003 issue7(2020) approved.

  • EMC standard of 47CFR FCC Part 15 subpart B approved.





Specifications Typical At TA = 25°C, Nominal Input Voltage And Rated Output Current Unless Otherwise Specified


Part Number Input
Voltage
Range
Input Current
(5Vin/12Vin)
Output Voltage Output Current Efficiency
(5Vin/12Vin)
Maximum
capacitor
Load
No Load Full Load
Vdc (mA TYP) (mA TYP) Vdc mA(TYP) %(TYP) μF
YLB10-05S05 4.5-18 20 / 15 2247 / 936 5 2000 89 / 89 3400
YLB10-05S12 4.5-18 20 / 15 2246 / 926 12 833 89 / 90 590
YLB10-05S15 4.5-18 20 / 15 2223 / 916 15 667 90 / 91 390
YLB10-05S24 4.5-18 25 / 20 2200 / 927 24 417 91 / 90 220


Input Specifications


Parameters Conditions Min Typ Max Units
Input Voltage All Models 4.5   18 Vdc
Input Surge Voltage
(100 ms max.)
All Models -0.7   25 Vdc
Start-up Voltage All Models     4.5 Vdc
Under Voltage Shutdown All Models   3.5   Vdc
Start-up Time Constant Resistive Load, Nominal Vin Power-up   30   ms
Remote ON/OFF   30  
Input Filter All Models Internal Pi type
Remote ON/OFF
(Ctrl PIN Refer To –Vin PIN)
Positive Logic DC/DC ON Open or 3.5 Vdc - 12 Vdc
DC/DC OFF Short or 0 Vdc – 1.2 Vdc
Input Current of Ctrl PIN -0.5   0.5 mA
Remote Off Input Current   3.5  


Output Specifications


Parameters Conditions Min Typ Max Units
Voltage Tolerance 100% Load -2   +2 %
Line Regulation Vin(min) to Vin(max) @100% Load -0.2   +0.2 %
Load Regulation 0% Load to 100% Load -0.5   +0.5 %
Ripple & Noise
(BW=20MHz)
With an 0.47uF MLCC 15Vout & 24Vout     150 mVp-p
5Vout & 12Vout     100
Transient Response Setting Time 25% Load Step Change   300 500 us
Transient Response Deviation 25% Load Step Change -5 ±3 +5 %
Temperature Coefficient   -0.02   +0.02 %/℃
Output Power Protection

% of Io, Hiccup mode,

 Auto-recovery

120 150 180 %
Short Circuit Protection Continuous [Hiccup Mode], Auto-Recovery
Over Voltage Protection 5Vout 6.2 Vdc
12Vout 15
15Vout 18
24Vout 30


General Specifications


Parameters Conditions Min Typ Max Units
Isolation Voltage Input to Output (60sec) 1600     Vdc
Input (Output) To Case (60sec) 1000     Vdc
Isolation Resistance 500Vdc 1000    
Isolation Capacitance 100kHz, 1V     2200 pF
Switching Frequency 100% Load, Nominal Input   200   KHz
Operating Ambient Temperature
(Power Derating See Derating Graph)
Nominal Vin,
100% Load
YLB10-05S05,
YLB10-05S12
-40   85.5
YLB10-05S15   87.4
YLB10-05S24   89.4
Thermal Impedance 20LFM 15.8 ℃/W
100LFM 11.3
200LFM 9.2
400LFM 6.3
Maximum Case Temperature       105
Storage Temperature   -55   125
Humidity Non-Condensing 5   95 %
Cooling Natural Convection
Case Material Copper
Potting Material Silicone (UL94-V0)
MTBF MIL-HDBK-217F@25℃ (calculated) 1,468,837 Hours
Weight   17.2 g
Dimensions 25.4 x 25.4 x 10.6 mm


Dimension






 Files Download        YLB10-Series.pdf



Certification




FEEDBACK

68D15 Series 15W 1.5KV Isolation 2:1 Wide Input DC-DC Converter

68DW15 Series 4:1 Wide Input 15W 1.5KV Isolation DC-DC Converter

68D20 Series 20W 1.5KV Isolation 2:1 Wide Input DC-DC Converter

68DW20 Series 20W 1.5KV Isolation 4:1 Wide Input DC-DC Converter

96DW-R6 Series 30W 1.5KV Isolation 4:1 Wide Input DC-DC Converter

76D-3W Series 3W 1.5KV Isolation 2:1 DC-DC Converter

76D-6W Series 6W 1.5KV Isolation 2:1 Wide Input Range DC-DC Converter

68DW10-R6 Series 4:1 Wide Input 10W 1.5KV Isolation DC-DC Converter

76DW-6W Series 6W 2.5KV Isolation 4:1 Wide Input DC-DC Converter