Half-Brick DC-DC Converter Module, Low Profile, 75W Single Regulated Output Power, 2250Vdc Isolation, 4:1 Wide Input Range, DIL9 Package

Product Description1

Features
  • 75 watt DIL industry standard package.
  • 4:1 wide input voltage.
  • 100% burned in.
  • High efficiency to 92%.
  • Customized solutions available.
  • Half-Brick package material.
  • Operating temperature:-40°C to +87°C.
  • 3 years warranty.
  • UL/cUL/IEC/EN 62368-1 approved, CB-Report, CE Marking.
  • EMC standard of Canadian ICES-003 issue7(2020) approved.
  • EMC standard of 47CFR FCC Part 15 subpart B approved.
Applications
  • Industrial Automation Control.
  • Telecommunication Infrastructure.
  • Remote Monitoring & IoT Gateways.
  • Automated Guided Vehicles (AGV/AMR).
  • Military & Aerospace Test Equipment.
Specifications typical at TA = 25°C, nominal input voltage and rated output current unless otherwise specified
Part Number Input
Voltage
Range
Input
Current
Output
Voltage
Output
Current
Efficiency Maximum
Capacitor
Load
Vdc No-Load
(mA TYP)
Full-Load
(mA TYP)
Vdc mA %TYP uF
YHB75-24S033 9-36 100 2780 3.3 18000 89 30000
YHB75-24S05 9-36 100 3434 5 15000 91 30000
YHB75-24S12 9-36 100 3434 12 6250 91 5200
YHB75-24S15 9-36 100 3434 15 5000 91 3300
YHB75-24S24 9-36 100 3472 24 3125 90 1300
YHB75-48S05 18-75 75 1717 5 15000 91 30000
YHB75-48S12 18-75 75 1698 12 6250 92 5200
YHB75-48S15 18-75 75 1698 15 5000 92 3300
YHB75-48S24 18-75 75 1717 24 3125 91 1300
YHB75-110S05 40-160 35 757 5 15000 90 30000
YHB75-110S12 40-160 35 749 12 6250 91 5200
YHB75-110S15 40-160 35 749 15 5000 91 3300
YHB75-110S24 40-160 35 749 24 3125 91 1300
Input Specifications
Parameters Conditions Min Typ Max Units
Input Voltage Range 24V Models 9 36 Vdc
48V Models 18 75
110V Models 40 160
Input Surge Voltage
(100 ms Max.)
24V Models -0.7 50
48V Models -0.7 100
110V Models -0.7 170
Start-up Voltage 24V Models 9 Vdc
48V Models 18
110V Models 40
Under Voltage Shutdown 24V Models 7.5 Vdc
48V Models 16
110V Models 36
Start-up Time
(Constant Resistive Load)
Constant Resistive Load, Nominal Vin Power-up 30 ms
RemoteON/OFF 30
Input Filter All Models Internal PI Network
Remote ON/OFF
(Refer To-Vin PIN)
Positive Logic DC/DC ON Open or 3.5 - 12 Vdc
DC/DC OFF Short or 0 – 1.2 Vdc
Input Current Of Ctrl PIN -0.5 0.5 mA
Remote Off Input Current 3
Output Specifications
Parameters Conditions Min Typ Max Units
Voltage Tolerance 100% load -1 +1 %
Line Regulation Vin(min) to Vin(max) @100% Load -0.2 +0.2 %
Load Regulation 0% Load to 100% Load -0.2 +0.2 %
Ripple & Noise
(BW=20MHz)
With a 1uF MLCC
and 33uF PolyTan
3.3Vout 75 mVp-p
5Vout 100
12Vout, 15Vout 125
With a 4.7uF MLCC 24Vout 250
Transient Response
Setting Time
25% Load Step Change 350 500 us
Transient Response
Deviation
25% Load Step Change -5 ±3 +5 %
Temperature Coefficient

-0.02 + 0.02 %/°C
Voltage Adjustability % of Vout,
Maximum output deviation is inclusive of remote sense
-10 +10 %
Remote Sense % of Vout(nom).
If remote sense is not being used,
Sense pins should be connected to corresponding polarity OUTPUT pins.
-10 +10 %
Output Power
Protection
% of Io, Hiccup mode, Auto-recovery 120 150 180 %
Short Circuit
Protection
Continuous [Hiccup Mode] ,Auto-Recovery
Over Voltage
Protection
3.3Vout 4.3 Vdc
5Vout 6.2
12Vout 15
15Vout 18
24Vout 30
General Specifications
Parameters Conditions Min Typ Max Units
Isolation Voltage Input To Output (60sec) 2250 Vdc
Isolation Resistance Input(Output) To Case (60sec) 1600 Vdc
500Vdc 1000
Isolation Capacitance 100kHz,1V 2600 pF
Switching Frequency 100% Load, Nominal Input 220 KHz
Operating Temperature
(Power Derating See Derating Graph)
Nominal Vin, 100% Load YHB75-24S24, YHB75-110S05 -40 59 °C
YHB75-24S033, YHB75-24S05,
YHB75-24S12, YHB75-24S15,
YHB75-48S05, YHB75-48S24,
YHB75-110S12, YHB75-110S15,
YHB75-110S24
64
YHB75-48S12, YHB75-48S15 69
Thermal Impedance 20LFM 5.5 °C/W
100LFM 4.5
200LFM 3.3
400LFM 2.3
Operating Case Temperature Base-plate 105 °C
Over Temperature Protection Base-plate 115 °C
Storage Temperature -55 125 °C
Humidity Non Condensing 5 95 %
Cooling Natural Convection
Case Material Aluminum Base-plate With Plastic Case
Potting Material Silicone (UL94-V0)
MTBF MIL-HDBK-217F@25℃ 3.547X105 Hours
Weight 100 g
Dimensions 61.0 x 57.9 x 15.0 mm
Certification
Markings and Dimensions Related Products Files Download
DC-DC Converter, 60W Single Regulated Output Power, 1.6KVdc Isolation, 4:1 Wide Input Range,2" X 1" Size, DIL6 package
YNB60 Series

60 watt single output DC to DC power converter with wide input 4:1 voltage range. YNB60 Series...

Details
DC-DC Converter, 50W Single Regulated Output Power, 1.6KVdc Isolation, 4:1 Wide Input Range,2" X 1" Size, DIL6 package
YNB50 Series

50 watt DC to DC power converter with wide input 4:1 voltage range. YNB50-series has 1.6KV...

Details
Half Brick Size DC-DC Converter 75W YHB75 Series

4:1 Wide Input Voltage Range Regulated Output 2.25KV Isolation DC-DC Converter PDF Catalogue

Download
YHB75 Series UL Certificate File

YHB75 Series UL Certificate File

Download
YHB75 Series CB Certificate File

YHB75 Series CB Certificate File

Download
YHB75 Series 47-CFR FCC Part 15 Certificate File

YHB75 Series 47-CFR FCC Part 15 Certificate File

Download
YHB75 Series ICES-003 issue7 Certificate File

YHB75 Series ICES-003 issue7 Certificate File

Download

FEEDBACK

1W SIP7 DC-DC Converter, Medical Application, 5KV/6KV Isolation

2W DIL16 2:1 Single/Dual Regulated Output DC-DC Converter, 1.5KV Isolation

10W Railway DC-DC Converter In DIL24 Package With 40-160Vdc 4:1 Wide Input Range And Remote On/Off

1W DIL14 Single/Dual Output DC-DC Converter, 1KV Isolation

1.8W DIL24 Single/Dual Output DC-DC Converter, 0.5KV Isolation