DC-DC Converter, 30W Single & Dual Output Power, 1.6KV Isolation, 4:1 Wide Input Range, DIL6 Package

Product Description1

Features

30W DIL package.
4:1 wide input range.
100% burned in.
High efficiency up to 88%.
Customized solutions available.
Remote control:on/off.
UL 94V-0 package material.
Operating temperature from -40°C to +85°C.
3 years warranty.

Applications

Industry Control System.
Semiconductor Equipment.
Wireless Network.
Telecom/Datacom.
Measurement.

Specifications typical at TA = 25°C, nominal input voltage and rated output current unless otherwise specified

Part Number	Input Voltage	Input Current		Output Voltage	Output Current	Output Ripple & Noise	Capacitor Load Max	Efficiency
Part Number	Vdc	No-Load (mA TYP)	Full Load (mA TYP)	Vdc	Full Load (mA)	mVp-p	uF Max	%TYP
96DW-24S03R5NL	9-36	120	1265	3.3	7500	100	20000	82
96DW-24S05R5NL	9-36	130	1488	5.0	6000	100	14400	84
96DW-24S12R5NL	9-36	50	1471	12	2500	100	3000	85
96DW-24S15R5NL	9-36	50	1471	15	2000	100	2000	85
96DW-24D12R5NL	9-36	60	1471	± 12	1250	100	± 2000	85
96DW-24D15R5NL	9-36	60	1471	± 15	1000	100	± 1300	85
96DW-48S03R5NL	18-75	70	629	3.3	7500	100	20000	82
96DW-48S05R5NL	18-75	80	744	5.0	6000	100	14400	84
96DW-48S12R5NL	18-75	30	727	12	2500	100	3000	86
96DW-48S15R5NL	18-75	30	727	15	2000	100	2000	86
96DW-48D12R5NL	18-75	30	727	± 12	1250	100	± 2000	86
96DW-48D15R5NL	18-75	30	727	± 15	1000	100	± 1300	86

Note:
1. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment)
MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled environment)
2. The ON/OFF control pin voltage is referred to -Input. (Leave open if not used.)

Input Specifications

Parameters	Conditions		Min	Typ	Max	Units
Voltage Types					4:1
Filter	Pi TYPE
Input surge voltage 100mS max	24V input 48V input			50 100		Vdc Vdc
Input reflected ripple current	Nominal Vin and full load			20		mAp-p
Start up time	Nominal Vin and constant resistive load	Power up		40		mS
Start up time	Nominal Vin and constant resistive load	Remote ON/OFF		30		mS
Start-up voltage	24V input			9		Vdc
Start-up voltage	48V input			18		Vdc
Shutdown voltage	24V input			8		Vdc
Shutdown voltage	48V input			16		Vdc
Protection	Fuse Recommended
Remote ON/OFF (Note 2)	DC-DC ON		OPEN
Remote ON/OFF (Note 2)	DC-DC OFF		Short to ground
Input current of Remote control pin	Nominal Vin		-0.5mA ~ +0.5mA
Remote off state input current	Nominal Vin		3mA

Output Specifications

Parameters	Conditions	Typ	Max	Units
Voltage Tolerance	Full load@Vin(nom.)		± 2	%
Short Circuit Protection	Hiccup, automatic recovery
Over Load Protection	nominal input	150		%
Over Voltage Protection (Zener Diode Clamp)	3.3V Output 5.0V Output 12V Output 15V Output	3.9 6.2 15 & ± 15 18 & ± 18		V V V V
Line Regulation	LL to HL at Full Load		± 0.5	%
Load Regulation	Single		± 0.5	%
Load Regulation	Dual, Balance Load, 25% to 100% load		± 1.0	%
Cross Regulation	Dual (25% to 100% Load)		± 5.0	%
Ripple & Noise	20MHz bandwidth		100	mVp-p
Transient response recovery time	25% load step change	250	350	us
External Trim Adj. Range		±10% of Output

General Specifications

Parameters	Conditions	Min	Typ	Max	Units
Isolation Resistance	500Vdc	1000			MΩ
Switching Frequency			300		KHz
Isolation Capacitance			2200		pF
Case Material	Nickel coated copper with no-conductive base
Potting material		Silicone (UL94-V0)
Isolation Voltage	For 10 seconds			1600	VDC
Design meets safety	IEC60950-1, UL60950-1, EN60950-1
Dimensions	-R5NL -R5HSNL	50.8X 25.4 X 10.6 50.8X 25.4 X 15.3			mm mm
Weight	Without Heatsink	36.5			g
Weight	With Heatsink	43.1			g
MTBF (Note 1)	BELLCORE-TR-NWT-000332 MIL-HDBK-217F	3.163 x 10⁶ 4.347 x 10⁵			hrs hrs

Environmental Specifications

Parameters	Conditions	Min	Typ	Max	Units
Operating Temperature	Without Heatsink	-40		+85	°C
Operating Temperature	With Heatsink	-40		+87	°C
Maximum case temperature				+105	°C
Storage Temperature		-55		+125	°C
Temperature Coefficient	100% Load			± 0.03	%/°C
Cooling	Natural Convection (20LFM)
Thermal impedance @20LFM	Convection		12		°C/Watt
Thermal impedance @20LFM	Convection with heat-sink		10		°C/Watt
Thermal shock		MIL-STD-810F
Vibration		MIL-STD-810F
Relative humidity		5% to 95% RH

Certification

Markings and Dimensions Related Products Files Download

10W DC-DC Converter Series with 2:1 Wide Input Options 1500V Isolation and 82% Efficiency

61D-BNL Series

1.5KV isolated voltage 10 watt DC to DC power converter has a wide input 2:1 voltage range....

DC-DC Converter, 30W Single & Dual Output Power, 1.6KV Isolation, 4:1 Wide Input Range, DIL6 Package

Product Description1

30W 1.6KV Isolation 4:1 DIP DC-DC Converter(96DW-R5 Series)

Features

Applications

Specifications typical at TA = 25°C, nominal input voltage and rated output current unless otherwise specified

Input Specifications

Output Specifications

General Specifications

Environmental Specifications

Certification

61D-BNL Series

61D-R3 Series

61DW-R3 Series

66D Series

67D-R3 Series

67DW-R3 Series

95D-B3 Series

95D-R3 Series

95DW-B3 Series

95DW-R3 Series

96D-R5 Series

96DW-R5 Series

99D-R3 Series

YNB50 Series

YNB60 Series

YNC20 Series

YNC30 Series

YNC40 Series

Related Products